RJ Electrical logo, Heat Pumps Dunedin home page 0800 166 024

New heat pumps, installed and wired

A first heat pump, a second one for the bedrooms, or heat at the press of a button instead of the wood burner. Riley sizes it for the room, picks the spots inside and out, and runs the circuit himself.

Free quotes, clear pricing and tidy work. Riley quotes every job himself.

The work
Replacements, new installs, ducted and multi-room
The wiring
Riley’s a registered electrician: one booking covers it
Where
Dunedin city, the hill suburbs and Mosgiel
Brands
Mainly Daikin, plus Panasonic, Mitsubishi, Haier and Toshiba

Where’s your place on the hill?

Dunedin climbs from 3 m at St Kilda to 287 m at Brockville, then over the hill to Mosgiel. Wherever you are on it, Riley sizes the heat pump for your room and your winter.

Dunedin from St Kilda at sea level up through Roslyn, Wakari and Brockville, over the hill and down to Mosgiel0 m100 m200 m300 mSt KildaCityRoslynWakariHalfway BushBrockvilleMosgiel378 mDunedin from St Kilda at sea level up through Roslyn, Wakari and Brockville, over the hill and down to Mosgiel0 m100 m200 m300 mSt KildaRoslynBrockvilleMosgiel378 m

Job card

First heat pump

Riley picks the size for the room and the spots inside and out, and does the wiring himself.

Get a free quote

Who you deal with

RJ Electrical logo

RileyRJ Electrical, Dunedin

Heat Pumps Dunedin is Riley and RJ Electrical. Riley quotes the job, fits the heat pump and does the electrical side himself, so you deal with him directly from the first call to the remote in your hand.

He’s based in Wakari, on the hill, and works right across Dunedin and over the hill in Mosgiel.

About Riley
  • Registered electricianE 269203: the circuit and wiring in the same job
  • Heat pumpsReplaced, installed, ducted and serviced
  • Mainly DaikinThrough a Daikin accredited account
  • Free quotesClear pricing and tidy work

Which heat pump for which room

A high-wall unit suits most lounges and bedrooms. A floor console sits low under a window and suits a high-studded villa room, where warm air from a high-wall unit can sit up near the ceiling. For several rooms, a multi-room system runs two or more indoor units from one outdoor unit, and a ducted system heats the whole house through outlets in the ceiling.

High-wall

Most lounges and bedrooms

Floor console

High-studded villa rooms, under a window

Multi-room

Several indoor units on one outdoor unit

Ducted

The whole house, through ceiling outlets

Another room, or upstairs

Plenty of Dunedin homes have one heat pump in the lounge and cold bedrooms down the hall. A unit sized for one room won’t carry its heat through the whole house with the doors open. A second heat pump sized for the bedrooms, or a multi-room system, fixes that. Riley looks at where the pipes and the circuit can run, and where a second outdoor unit can sit, or whether one outdoor unit can run both.

Instead of the wood burner

A wood burner heats the room it’s in, once it’s going, and the wood has to be bought, stacked and carried. A heat pump sized to do the burner’s job warms the room at the press of a button, and cools it on a hot summer day. Across Dunedin and Mosgiel’s clean-air zone, a new wood burner has to meet emission limits; a heat pump has none. Riley sizes it for the room the burner heated and the rooms off it.

Where the units go

Inside, the unit goes high on an outside wall where it can blow along the room, not straight at a chair. Outside, the outdoor unit wants winter sun, free airflow and the maker’s clearances, on a firm pad or a wall bracket, and well away from the neighbour’s bedroom windows: Dunedin’s night-time limit at the boundary is 40 dB. On a hillside section that takes some thought, and Riley works it out on the quote visit.

Getting the most from it

A heat pump works best in a room that holds its heat. Ceiling and underfloor insulation, and stopping the draughts round doors and windows, let a smaller unit do the job and keep the running costs down. If the room has a gap there, Riley will say so when he quotes.

Install day

Riley fixes the indoor unit, drills the hole for the pipes, sets the outdoor unit on its pad or bracket, runs the pipes and the cable between them, and does the wiring back to the switchboard. The pipework is pressure-tested before the system is filled, then he tests the heat pump, sets the timer with you and shows you the remote. The old heater or unit goes with him if it’s coming out.

Shops and offices

We also fit heat pumps in shops and offices, from a single room to several. Tell Riley the space and how it’s used, and he’ll quote it the same way.

How a job runs

  1. Call or send the form

    Ring 0800 166 024, or send the form with a photo of the old unit and its label, or the room.

  2. Riley rings you back

    He talks the job through and sets a time to see the room and where the outdoor unit can go.

  3. Your free quote

    Clear pricing: the heat pump, the install, the electrical work and taking the old unit away.

  4. Install day

    The old unit comes off, the new one goes up, the wiring is checked or run new, and Riley tests it and shows you the remote before he leaves.

What moves the price

  • The size and type: high-wall, floor console, multi-room or ducted
  • The pipe run between the indoor and outdoor units
  • Where the outdoor unit goes: on the ground, on a wall bracket or on a deck
  • The new circuit from the switchboard, and whether the board needs any work
  • Access, on a steep or tight section

Questions

Another question? Call 0800 166 024, or ask it in the quote form.

What size heat pump do I need?

It depends on the room, the house and where it sits. A room on the hill with big windows needs more than the same room near the harbour. Riley sizes it on the quote visit.

Can a heat pump replace my wood burner?

Yes, when it’s sized to do the burner’s job. Riley sizes it for the room the burner heated and the rooms off it.

Do I need a separate electrician?

No. Riley is a registered electrician, so the circuit is part of the same job, with the right electrical certificates.

Do I need a building consent?

Not for a standard wall-mounted heat pump in a house: the hole for the pipes is exempt work. Riley checks anything bigger, like ducted work, when he quotes.

Do you install in shops and offices?

Yes, light commercial work: shops and offices, one room or several.

Which brands do you install?

Mainly Daikin, and also Panasonic, Mitsubishi, Haier and Toshiba.

Get a free quote

Tell Riley the room, what heats it now, and where an outdoor unit could sit. He’ll ring to talk it through.

Call 0800 166 024

What to send Riley

  • A photo of the old heat pump, inside and out, and its label if you can see it
  • Which room or rooms, and roughly how big
  • What heats them now
  • Where an outdoor unit could sit

What happens next: Riley rings you to talk it through and set up your free quote.

What do you need?
Your home (optional)

    A photo of the old unit and its label (the model and age are on it), or of the room and the outside wall, helps Riley quote it right.

    Fields are required unless marked optional. Privacy policy